Dev License: This installation of WHMCS is running under a Development License and is not authorized to be used for production use. Please report any cases of abuse to abuse@whmcs.com

How do I configure my own, unlocked Linksys SPA2102 with ViaTalk?

These instructions assume that you are utilizing a computer that is plugged into the Ethernet port of a non-branded or unlocked LinkSys SPA2102.

1) Open a web browser (Internet Explorer, Safari, etc.) and copy/paste the following link into the address bar:

http://192.168.0.1/admin/voice/advanced/

2) You will be prompted to enter your administrative username and password.

username: admin
password: 

3) Click the 'Line 1' tab at the top of the page. Once the page loads, you will see the information for your adapter's configuration. 

(You may open a separate browser window and visit your ViaTalk Control Panel to view your credentials found under the 'Softphone Configuration' icon.)

Proxy:  
Display Name:
User ID:
Password:
DTMF Tx Method: Auto

4) Click the 'Submit All Changes' link at the bottom of the page.

Once this is complete, in approximately one minute you should see the Phone 1 light lit on the device. Plug a standard, touch-tone phone into the Phone 1 port to confirm dial tone, and you may then begin placing calls!

Răspunsul a fost util?

 Tipărire

V-ar mai putea interesa și

How do I configure my own, unlocked Innomedia Gizmo with ViaTalk?

1) Connect your computer to the available LAN port on the device.2) Open a web browser (Internet...

What are the available server options for my BYOD device?

The following is a current list of the available registration servers and their...

What is a working dial plan for my device?

The following is a dial plan confirmed to work with all international and local calling areas for...

Can I use my Cisco CallManager Express IP Phone system?

Yes, here is a known working configuration to help you get started on configuring your CCME to...

How do I configure my own, unlocked PAP2 with ViaTalk?

Connect the PAP2 to an available Ethernet port on your network router. Plug a standard,...

Powered by WHMCompleteSolution